The Good News First
One of the best things about professional epoxy flooring is how easy it is to maintain. Unlike bare concrete that stains and collects dust, or painted floors that chip and peel, quality epoxy essentially takes care of itself.
Here's your complete maintenance guide—it's shorter than you might expect.
Weekly Maintenance (5 Minutes)
For most residential garages, weekly maintenance is simple:
- Dust mop or sweep to remove debris
- That's it. Seriously.
The smooth, non-porous surface of epoxy means dirt and dust sit on top rather than embedding in the floor. A quick sweep keeps your floor looking pristine.
Monthly Maintenance (15 Minutes)
Once a month, give your floor a quick mop:
- Sweep or dust mop first to remove loose debris
- Mop with warm water and a pH-neutral cleaner (like Simple Green diluted)
- For stubborn spots, use a soft-bristle brush
- Let air dry or use a squeegee for faster drying
Recommended Cleaners
- ✓ Simple Green (diluted 10:1)
- ✓ Ammonia-free all-purpose cleaners
- ✓ Dish soap (small amount in warm water)
- ✗ Avoid: Citrus cleaners, vinegar, acidic products
- ✗ Avoid: Soap-based cleaners (leave residue)
Dealing with Spills
The beauty of epoxy is that nothing penetrates the surface. Spills that would permanently stain concrete just wipe right up:
- Oil and grease: Wipe up with a paper towel, clean with degreaser if needed
- Chemicals: Wipe up promptly (epoxy is chemical-resistant but not chemical-proof)
- Paint: Dried latex paint can usually be peeled off; use mineral spirits for oil-based
- Hot tire marks: Shouldn't happen with professional epoxy, but if they do, use a degreaser
What to Avoid
Epoxy is tough, but there are a few things to avoid:
Don't Use
- Steel wool or abrasive pads – Can scratch the finish
- Citrus cleaners or vinegar – Can dull the gloss over time
- Soap-based cleaners – Leave hazy residue
- Pressure washers – Unnecessary and can damage edges
Protect Against
- Sharp metal edges – Use pads under jack stands, tool boxes
- Dragging heavy items – Lift instead of sliding
- Welding sparks – Use a welding mat to protect the surface
Seasonal Care for High Desert
Living in Victorville, Hesperia, or Apple Valley means dealing with unique conditions:
Summer (High Heat)
- No special care needed—our UV-stable topcoat handles desert sun
- Park hot cars without worry (professional epoxy resists hot tires)
Winter (Temperature Swings)
- Moisture can condense on cold floors—wipe up before it evaporates to avoid water spots
- Salt/sand from mountain trips can be swept up normally
Monsoon Season (Dust Storms)
- Keep garage door sealed during dust storms
- Sweep more frequently during dusty periods
When to Call Us
Professional epoxy rarely needs repairs, but contact us if you notice:
- Peeling or delamination (shouldn't happen with our installation)
- Deep scratches that expose concrete
- Yellowing (indicates UV damage—recoatable)
- Persistent stains that won't clean
Most of these issues can be addressed with a simple recoat rather than full replacement, extending your floor's life another 10-15 years.
The 2-Minute Summary
- ✓ Weekly: Quick sweep or dust mop
- ✓ Monthly: Mop with diluted all-purpose cleaner
- ✓ Spills: Wipe up promptly
- ✓ Avoid: Citrus, vinegar, abrasives
- ✓ Protect: Use pads under heavy metal objects
That's really all there is to it. Spend more time enjoying your beautiful floor and less time worrying about it.